According to the book a slide is what is recommended.
Basically slide the hips going backwards and then slide them back going forwards. This is per 12-1-0 basic hitters pattern.
I am struggling with my shoulders and I believe it is due to conflicting styles of hip action in my swing.
I have a sliding hip take away but then more of a standard hip move in the down swing.
I believe this leads to the right shoulder being slightly above plane due to the shoulders moving a bit more vertically rather than horizontally in the back swing and due to a lack of definitive slide the shoulder never really gets back under plane coming back to the ball.
The shoulder simply remains slightly above plane the entire down swing which I believe to be a bad thing.
Am I on the right track here?
Should I be focusing more on a Hip Slide rather than the Standard Hip Turn?
Is the right shoulder being slightly above plane at top a bad thing or is it OK as long as I bring it back down to plane VIA hip slide to trigger the down swing?
The following Pattern is a Goal. I think that Line 14 was changed to "Slide" in the 7th Edition for Hitters and Swingers (lies, lies, lies). Maybe someone with a 7th Edition could look that up? I wouldn't do a Slide if you paid me.
This Pattern is based on Chapter 10-19-A in the Component Catalog and is most useful to the stronger players. Avoid “customizing” it with other Variations until it approaches the “expert” stage. Then follow 3-B.
The Center 2 Pics are a Slide. I don't do that. I don't do anything close to that. Ugh..........
Homer's original definition of the Slide Hip Turn is depicted in the photos. Namely, "Slide with no appreciable Turn". In fact, this definition remains encapsulated in both the photos and the Chapter 11 summary of the 14th Component:
Turn -- Zero
Shift -- Free
In both directions.
So what gives?
Beginning with the 5th edition, Homer changed the definition to read:
"Slide with delayed Turn". [Italics mine.]
Until the 7th edition (published posthumously 23 years after Homer's death), all this lay under the radar. Then, the Slide Hip Turn Variation (10-14-B) became the listed Variation in both the Basic Stroke Patterns (12-1-0 and 12-2-0). During Homer's lifetime and through six editions, the Variation had always been the Standard Hip Turn (10-14-A), i.e., a free Turn with a Weight Shift in both directions.
Now, players referring to the Stroke Patterns and aspiring to Golfing Perfection are left with a horrific photographic impression of the listed Variation. An impression only confirmed when referenced against the summary characteristics of Chapter 11.
Parallel (to the Line) Hip Motion (Weight Shift) With Delayed Turn
Originally Posted by grantc79
I am confused about what type of hip action a Hitter should have.
Firstly, I have been told on this board to not slide the hips but rather to turn them. Basically use a standard hip turn.
Then I came across a post by Yoda today that seems to suggest otherwise. He seems to be saying there is a definite slide down the delivery line.
The Standard Hip Turn includes a Weight Shift, and this can be accomplished only with a Hip Slide.
I recommend focusing on the Weight Shifts -- to the Right Foot and then to the Left Foot -- and not on the Hip Motion. Why? Because focusing on sliding makes it way too easy to get into an exaggerated 'pushing out' of the Hips, first to the right and then to the left. Exactly what is being illustrated, by the way, in the Slide Hip Turn photos.
The 3rd edition offered this solution to the Hip Turn/Slide conundrum:
Sharp Turn.
Slide. [My note: Parallel to the Square Plane Line and with the Hips still Turned.]
Swing!
Take Hogan's advice on the Downstroke Hip Turn in Five Lessons: "There must be enough lateral motion to move the weight to the left foot."
The Hitter using as the Delivery Line the Baseline of the Inclined Plane (the true Geometric Plane Line per 2-J-3) senses the Hip Motion as parallel to this Square Plane Line. However, Hitters using the Angle of Approach procedure (beyond -- way beyond -- the scope of this post) would sense the Hip Motion as parallel to that "Inside-Out" Line.
To me anyway, the "Shiftless" Hip Turn is like Turning in a Barrel and is good for short shots for a swinger. The "Slide" may be good for a Hitter for short Shots.
The Standard Hip Turn with a Weight Shift has, to me anyway, always included a Slide. The Slide creates the Secondary Axis Tilt. Slide to create only enough Tilt.
However, Hitters using the Angle of Approach procedure (beyond -- way beyond -- the scope of this post) would sense the Hip Motion as parallel to that "Inside-Out" Line.
The 3rd edition offered this solution to the Hip Turn/Slide conundrum:
Sharp Turn.
Slide. [My note: Parallel to the Square Plane Line and with the Hips still Turned.]
Swing!
Yoda , if you dont mind.
"Sharp Turn, Slide, Swing". Thats what I feel, I think. But some would say its "Sharp Turn, Slide , Turn the Hips Hard". And so my question is ............given the quote from the 3rd above, does the Hip Slide represent the Hips portion of the 6-M-1 Downswing Sequence? Or does it require a "ground up" sequential turning of the Hips?
Me , I feel like the Hips and Shoulders sort of go together, but ..........you know that already. Like a hockey slap shot as you diagnosed.
I think that Line 14 was changed to "Slide" in the 7th Edition for Hitters and Swingers (lies, lies, lies). Maybe someone with a 7th Edition could look that up? I wouldn't do a Slide if you paid me. 
Linear Mode
