If you moved your head by x inches in any direction, are you able to move it back x inches?
All the time?
Per 1-L-1, "The Stationary Post (player's head) accurately returns the Clubhead through the ball (Centered Arc)"
With that, the Real Debate is...why wouldn't anyone want a centered arc?
Comdpa,
Let there be no mistake, I do understand the concept of Pivot Center.
The reason of my thread is that there has to be a reason why it is put in the 7th edition, and I have talked to other AI´s about the subject, and I have received different interpretations on this sentence.
You can read it as the hinge pin should be vertical during the hole swing or that the pin can tilt to one side or the other as long as the end in the ground do not move from it´s position, which is precisely between the feet. The mental picture I have in front of me is like a metronome.
How do you interpret it?
__________________
Golf is an impossible game with impossible tools - Winston Churchill
Let there be no mistake, I do understand the concept of Pivot Center.
The reason of my thread is that there has to be a reason why it is put in the 7th edition, and I have talked to other AI´s about the subject, and I have received different interpretations on this sentence.
You can read it as the hinge pin should be vertical during the hole swing or that the pin can tilt to one side or the other as long as the end in the ground do not move from it´s position, which is precisely between the feet. The mental picture I have in front of me is like a metronome.
How do you interpret it?
See 7-12 . . . I think that should clear up any interpretation issues. The title of the section is Swing Center TRIPOD. The head does't move, but what is UNDERNEATH it may. And in 1-L #1 it says STATIONARY Post (player's head). The post is IMAGINARY . . . It ain't the spine. It is a line drawn up between the feets and up through the mellon. Also see Axis Tilt in the Glossary . . .
Mechanical - To change directions, the helicopter pilot alters the plane of the rotating blades by tilting their axis in the new direction.
Golf - To change the plane of the Shoulder Turn without moving the Head, the golfer must tilt the Shoulder Axis by moving the Hips.
Let there be no mistake, I do understand the concept of Pivot Center.
The reason of my thread is that there has to be a reason why it is put in the 7th edition, and I have talked to other AI´s about the subject, and I have received different interpretations on this sentence.
You can read it as the hinge pin should be vertical during the hole swing or that the pin can tilt to one side or the other as long as the end in the ground do not move from it´s position, which is precisely between the feet. The mental picture I have in front of me is like a metronome.
Sorry for the poor clarification, I will blame it on that english is my third language.
The point I want to make is that on page 29 under 2-H, regarding the Hinge Pin through the stationary head down to a point right between the feet, Mr Kelley suddenly In My Translation, makes the stationary head mandatory. Which could end the debate that our humble host has with the host of another TGM-site!
Or is my translation faulty?
__________________
Golf is an impossible game with impossible tools - Winston Churchill
Sorry for the poor clarification, I will blame it on that english is my third language.
The point I want to make is that on page 29 under 2-H, regarding the Hinge Pin through the stationary head down to a point right between the feet, Mr Kelley suddenly In My Translation, makes the stationary head mandatory. Which could end the debate that our humble host has with the host of another TGM-site!
See 7-12 . . . I think that should clear up any interpretation issues. The title of the section is Swing Center TRIPOD. The head does't move, but what is UNDERNEATH it may. And in 1-L #1 it says STATIONARY Post (player's head). The post is IMAGINARY . . . It ain't the spine. It is a line drawn up between the feets and up through the mellon. Also see Axis Tilt in the Glossary . . .
Mechanical - To change directions, the helicopter pilot alters the plane of the rotating blades by tilting their axis in the new direction.
Well put!!!
Golf - To change the plane of the Shoulder Turn without moving the Head, the golfer must tilt the Shoulder Axis by moving the Hips.
It all depends on your focus of the "staionary center". I think you can have a stationary head and that becomes a "head centered" pivot .... Colin Montgomery comes to mind. But if the head is to stay centered and I agree with Mr. Blake "set it there and keep it there", the multiple centers and hip shift "tilts" the axis to allow for this (in a dynamic motion).
Flexibility and conditioning and "too flat" of a shoulder turn have adverse effects on keeping this head centered IMO.
See 7-12 . . . I think that should clear up any interpretation issues. The title of the section is Swing Center TRIPOD. The head does't move, but what is UNDERNEATH it may. And in 1-L #1 it says STATIONARY Post (player's head). The post is IMAGINARY . . . It ain't the spine. It is a line drawn up between the feets and up through the mellon.
The term Swing Center Tripod is found only in the title of 7-12 (the Pivot Component) of the 7th edition. Unfortunately, there is no expanation or reference to this important concept in 7-12. Thus, there is an unfortunate 'disconnect' here, in that the explanation of the SCT can be found only in 2-H (also only in the 7th edition):
The important thing is that the true Swing Center for ALL COMPONENTS is around a Hinge Pin with one end at the top of the Stationary Head and the other in the ground, precisely between the Feet, with no regard for Body Location or Position at any time.
The term Swing Center Tripod is found only in the title of 7-12 (the Pivot Component) of the 7th edition. Unfortunately, there is no expanation or reference to this important concept in 7-12. Thus, there is an unfortunate 'disconnect' here, in that the explanation of the SCT can be found only in 2-H (also only in the 7th edition):
The important thing is that the true Swing Center for ALL COMPONENTS is around a Hinge Pin with one end at the top of the Stationary Head and the other in the ground, precisely between the Feet, with no regard for Body Location or Position at any time.
Would this hingepin not be bottomed out at or near low point rather than 'precisely between the feet'?
I have always viewed this swing center being slightly left of center...
Sorry for the poor clarification, I will blame it on that english is my third language.
The point I want to make is that on page 29 under 2-H, regarding the Hinge Pin through the stationary head down to a point right between the feet, Mr Kelley suddenly In My Translation, makes the stationary head mandatory. Which could end the debate that our humble host has with the host of another TGM-site!
Or is my translation faulty?
I don't have the time to post to this right now- but I would say that you haven't translated it correctly. Hopefully I can get back to this later tonight but in the meantime- Here are three important clues 1) You need to take into account the entire context of the paragraph- you can't pull out a line of this paragraph by itself- that would be a complete misquote, and 2) If you use all of the clues possible that Mr. Kelley provided then it is crucially important that you look at his use of fonts and capitalization and 3) Understand that he understood at that time the "two" theories of head still and rotating around the spine- I might be going out on a limb but I would suggest that you read the paragraph as if he is addressing those two different camps- and clarifying his position on that point.
Maybe someone can put the entire paragraph up in it's entirety and EXACTLY as he typed it- as a starting reference point.
I don't have the time to post to this right now- but I would say that you haven't translated it correctly. Hopefully I can get back to this later tonight but in the meantime- Here are three important clues 1) You need to take into account the entire context of the paragraph- you can't pull out a line of this paragraph by itself- that would be a complete misquote, and 2) If you use all of the clues possible that Mr. Kelley provided then it is crucially important that you look at his use of fonts and capitalization and 3) Understand that he understood at that time the "two" theories of head still and rotating around the spine- I might be going out on a limb but I would suggest that you read the paragraph as if he is addressing those two different camps- and clarifying his position on that point.
Maybe someone can put the entire paragraph up in it's entirety and EXACTLY as he typed it- as a starting reference point.
I'll type it up tonight . . . Mikey . . . wonder if the 8th edition will have anything on Rolling Heads or Defrosting Heads?
Hybrid Mode
